Last viewed


The WRA-2138 Float Lenspanel is dedicated to the use with Digital Backs with sensor activated electronic shutter and has a Rodenstock 6,5/138 HR-Float Digaron lens with Aperture Only mounted in a helical focussing mount, which also drives a floating element for optimal sharpness at any focussed distance.
The WRA-2138 fits to all Cambo Wide cameras with SLW-adapters.

Camera Movements:
WDS: Up / Down / Left / Right: 34 / 26 / 20 / 20mm
WRS: Up / Down / Left / Right: 25 / 15 / 20 / 20mm
1600: Up / Down / Left / Right: 20 / 20 / 20 / 20mm
The Rodenstock HR Digaron-SW float 138 mm f/6.5 is an exceptional sharp long focal length lens for adjustable technical cameras intended for a wide distance range from infinity up to an image scale 1:5 (β' = -0,2).
The optical design with eleven lens elements in ten groups is very complex for a prime lens. It has the highest possible resolving power extremely close to the diffraction limit. This is not only achieved across the entire field of the largest digital sensors – but also to the edge of the large 110mm image circle to allow for lens shifts and tilts.
The rotation of the focusing ring automatically controls the floating elements group and all aberrations are therefore minimized throughout the whole focusing range.
Even with extreme camera movements (shift and tilt) this lens provides an unprecedented sharpness to the corners as proven by the MTF curves given up to 80 lp/mm on the following pages 4 to 6. It provides negligible distortion (almost always below 1‰) and a total suppression of the chromatic aberration for perfect freedom from color fringing.

The image circle of the HR Digaron-SW float 138 mm f/6.5 has a constant diameter of 110 mm throughout its entire image scale range. For professional technical cameras, even with the largest sensor formats, this gives ample clearance for parallel shifts for perspective corrections (avoiding or reducing converging vertical lines). This also allows swing and tilt for extended depth of field without excessive stopping down of the aperture according to the Scheimpflug rule.

The broad focusing ring of the helical mount allows sensitive and precise focusing and automatically controls the adjustment of the floating elements group mentioned above.

This product is compatible with the PhaseOne XT system / No data transfer
Shortest focal distance to object: approx. 1.0 mtr

Image circle of lens at any f/stop: 110 mm

Optical Movements:
CCD size 37x37mm: 33/33 mm
CCD size 33x44mm: 34/30 mm
CCD size 36x48mm: 30/26 mm
CCD size 37x49mm: 31/27 mm
CCD size 40x54mm:  28/24 mm
CCD size 36x56mm:  29/24 mm

Please note that some optical movements may be larger than achievable due to mechanical limitation.
English language Download
Deutscher Sprache Download

Company & Policy

Cambo Fotografische Industrie BV is registered at the office of the Chamber of Commerce in Zwolle, The Netherlands under registration nr. 05032155.

Delivery terms

Unless otherwise agreed, Cambo delivers at incoterms EXW. On all sales the METAALUNIE conditions will apply, unless otherwise agreed.
Read more

Contact us

Haatlanderdijk 45 / NL-8263 AP  Kampen
P.O. Box  200    /   NL-8260 AE  Kampen
The Netherlands

tel: +31 (0) 38 3314644
fax: +31 (0) 38 3315110