Last viewed

WTSA-892_X Tilt - Swing

The WTSA-892_X Lenspanel is dedicated to the use with Digital Backs with sensor activated electronic shutter and has a Rodenstock 5,6/90 HR-SW Digaron lens with Aperture Only mounted in a helical focussing mount.
This version has a long barrel construction. without rear extension unit. It also features a helical mount with a 25mm displacement for close-up focussing.
This combination allows for use on the PhaseOne XT camera body without vignetting.

This lenspanel features an integrated tilt and swing mechanism which can be operated with two precise gear-driven knobs upto 5 degrees Tilt up and down and 5 degrees Swing left and right, while both swing and tilt can be set independently, separately but also in combination.
The movements have a clear and forced zero position where the parallel setting to the focal plane is guaranteed.

The WTSA-892_X fits to all Cambo Wide cameras with SLW-adapters. For use without vignetting on Cambo WRS cameras we advise the use of the WTSA-890 in short barrel configuration.
Shortest focal distance to object: 0,5 mtr

Image circle of lens at f/11: 120mm

Optical Movements:
CCD size 37x37mm: 33/33mm
CCD size 33x44mm: 29/26mm
CCD size 36x48mm: 26/23mm
CCD size 37x49mm: 25/22mm
CCD size 40x54mm: 23/21mm
CCD size 36x56mm: 25/21mm

Please note that the optical movements are larger than achievable due to mechanical limitation.

Camera Movements:
WDS: Up / Down / Left / Right: 34 / 26 / 20 / 20mm
WRS: Up / Down / Left / Right: 25 / 15 / 20 / 20mm
P1XT: Up / Down / Left / Right: 12 / 12 / 12 / 12mm
This product is compatible with the PhaseOne XT system / No data transfer
Shortest focal distance to object: 0,5 mtr

Image circle of lens at f/11: 120mm

Optical Movements:
CCD size 37x37mm: 33/33mm
CCD size 33x44mm: 29/26mm
CCD size 36x48mm: 26/23mm
CCD size 37x49mm: 25/22mm
CCD size 40x54mm: 23/21mm
CCD size 36x56mm: 25/21mm

Please note that some optical movements may be larger than achievable due to mechanical limitation.  

Camera Movements:
WDS: Up / Down / Left / Right: 34 / 26 / 20 / 20mm
WRS: Up / Down / Left / Right: 25 / 15 / 20 / 20mm
P1XT: Up / Down / Left / Right: 12 / 12 / 12 / 12mm

Company & Policy

Cambo Fotografische Industrie BV is registered at the office of the Chamber of Commerce in Zwolle, The Netherlands under registration nr. 05032155.

Delivery terms

Unless otherwise agreed, Cambo delivers at incoterms EXW. On all sales the METAALUNIE conditions will apply, unless otherwise agreed.
Read more

Contact us

Haatlanderdijk 45 / NL-8263 AP  Kampen
P.O. Box  200    /   NL-8260 AE  Kampen
The Netherlands

tel: +31 (0) 38 3314644
fax: +31 (0) 38 3315110
e-mail: info@cambo.com