Last viewed


The WRX-180S Lenspanel is dedicated to the use with IQ4 Digital Backs and has a Rodenstock 6,3/180 HR-S Digaron lens with Phase One X-Shutter mounted in a helical focussing mount, with 25mm travel.
This version has a split back focal length, existing of a shorter lensplate and a rear extension unit (48mm).
This combination allows for more shift before vignetting from the lensbarrel.
The WRX-180S fits to all Cambo Wide cameras with SLW-adapters.

In case the WRX-180S is being used on a XT body, the rear spacer can be replaced with the front spacer WRS-1049.
This is shown in the second picture, where the WRX-180S is mounted to a XT-body with the additinal WRS-1049.

Camera Movements:
WDS: Up / Down / Left / Right: 34 / 26 / 20 / 20mm
WRS: Up / Down / Left / Right: 25 / 15 / 20 / 20mm
1600: Up / Down / Left / Right: 20 / 20 / 20 / 20mm

This 180HR Digaron-S is also available on a Tilt/Swing Lenspanel version, see WTSX-180S
Due to technical reasons the max. open aperture of this lens in X-shutter version is reduced to f/6.3
Shortest focal distance to object: approx. 1.7 mtr

Image circle of lens at f/11: 80 mm

Optical Movements:
CCD size 37x37mm: 17/17mm
CCD size 33x44mm: 17/14 mm
CCD size 36x48mm: 14/12 mm
CCD size 37x49mm: 13/11 mm
CCD size 40x54mm:  9 / 8 mm
CCD size 36x56mm:  13/ 7 mm

Please note that some optical movements may be larger than achievable due to mechanical limitation.

Company & Policy

Cambo Fotografische Industrie BV is registered at the office of the Chamber of Commerce in Zwolle, The Netherlands under registration nr. 05032155.

Delivery terms

Unless otherwise agreed, Cambo delivers at incoterms EXW. On all sales the METAALUNIE conditions will apply, unless otherwise agreed.
Read more

Contact us

Haatlanderdijk 45 / NL-8263 AP  Kampen
P.O. Box  200    /   NL-8260 AE  Kampen
The Netherlands

tel: +31 (0) 38 3314644
fax: +31 (0) 38 3315110